The core features and application advantages of MST8011 24MHz XO in DVR products

In the field of surveillance and security, digital video recorders  DVRs  have stringent requirements for the performance of clock oscillators. The MST8011 24MHz XO, a programmable oscillator based on MEMS technology, has become an ideal choice for core components in DVRs with its exclusive features, and its technical advantages are directly reflected in the video processing efficiency and reliability of DVRs.

1. ±20ppm Frequency Stability Over Full Temperature Range: Eliminating Video Timing Errors

The MST8011 can achieve a frequency stability of ±20ppm within the industrial temperature range of -40℃ to +105℃. This feature is crucial for DVRs. When devices are deployed in extreme environments such as outdoor high temperatures or cold storage, traditional quartz oscillators may cause video frame timing disorder due to temperature drift. However, by combining MEMS resonators with digital temperature compensation technology, the MST8011 ensures that the timestamp error of each video frame is less than 1 microsecond. For example, in traffic monitoring scenarios, when vehicles pass through the monitored area at high speed, a stable clock can ensure the accurate sampling frequency of the license plate recognition system, avoiding license plate character breaks or recognition errors caused by frequency drift.

2. 1MHz-180MHz Wide Frequency Programmability: Meeting the Needs of Multiple DVR Modules

Unlike fixed-frequency quartz crystals, the MST8011 supports frequency programming with a precision of 1Hz. In DVRs, the front-end camera interface may require a 24MHz clock synchronization, while the back-end network transmission module may need a high-frequency clock above 100MHz. By reconfiguring the frequency through the SPI interface, the full-chain clock requirements of the DVR can be met without changing hardware. A brand of DVR that adopted the MST8011 simplified the design that originally required three quartz crystals of different frequencies to a single programmable device, reducing the circuit board area by 40% and the material cost by 35%.

3. 4.5mA Ultra-low Power Consumption: Energy Optimization for 7×24-hour Operation

With a supply voltage of 1.8V, the typical operating current of the MST8011 is only 4.5mA, and the power consumption in standby mode is as low as 0.6μA. This feature is of great significance to DVR clusters in centralized monitoring centers. Assuming that a monitoring center deploys 100 DVRs, each using three MST8011s, compared with traditional quartz crystals (with a power consumption of about 8mA), the annual electricity cost can be reduced by about 12,000 yuan. At the same time, the low power consumption brings a low temperature rise, reducing the internal temperature of the DVR by 5-8℃, which significantly extends the service life of key components such as hard disks.

4. 60,000g Shock Resistance + <0.1ppb/g G-sensitivity: Stability in Industrial Environments

The MST8011, with its silicon-based MEMS structure, has a shock resistance of over 60,000g and a G-sensitivity of less than 0.1ppb/g. In industrial manufacturing scenarios, continuous vibration generated by large machinery often causes frequency offset in quartz crystals, leading to DVR video stuttering. A DVR installed on an automobile production line that uses the MST8011 can maintain smooth video even within 3 meters of a stamping machine, while devices using quartz crystals experience about 15 frame losses per hour in this environment.

5. 5ms Fast Start-up + Wide Voltage Compatibility: Immediate Response for Emergency Monitoring

In the face of emergencies, DVRs need to quickly enter working condition. The start-up time of the MST8011 is less than 5ms, 3-5 times faster than traditional quartz crystals. In a bank security system, when an emergency alarm is triggered, the DVR can start up and begin recording within 10ms, ensuring that the entire event is recorded. At the same time, its wide voltage range of 1.62V-3.63V can directly match the backup battery power supply of the DVR (such as a 1.8V lithium battery or a 3.3V power module), avoiding clock anomalies caused by power fluctuations.

6. Comparison of Core Performance with Competitors

As seen from the comparison above, the MST8011 outperforms traditional solutions in frequency precision, resistance to mechanical stress, and power consumption control. Compared with other MEMS products, its 1Hz programming precision and wider frequency range better meet the multi-function integration needs of DVRs.

The MST8011, through the deep integration of MEMS technology and digital circuits, has elevated the core requirements of DVRs for clock sources stability, flexibility, low power consumption, and anti-interference capability to a new level. As security monitoring technology evolves towards 4K/8K ultra-high definition and AI intelligent analysis, the programmable characteristics and outstanding performance of the MST8011 are becoming one of the core competitiveness for the design of next-generation DVR products.

About Mandu Technology

Shenzhen Mandu Technology Co., Ltd. has steadfastly centered its operations on the distribution of high-performance, high-quality, and highly reliable integrated circuit products. Its portfolio encompasses memory chips, differential crystal oscillators, and MCU microcontrollers, while progressively integrating analog signal chain products. The company prides itself on delivering comprehensive and cost-effective solutions to its customers. Its products find applications across a broad spectrum of industries, including but not limited to network communication, industrial control, robotics, medical equipment, personal health, and numerous other fields.

Business: sales@manduic.com

Website: www.manduic.com

Sales: +86 150-1290-5940