Why eMMC
An embedded non-volatile storage module that puts NAND flash die, a flash controller, and the MMC interface protocol into one BGA package, soldered directly to the board rather than plugged in like an SD card.
The integrated controller handles bad block management, wear levelling, error correction, and cache scheduling. The host talks to it over a standard MMC interface, so firmware does not have to manage raw flash at all.
Raw NAND leaves error correction and bad block handling to the processor, which is flexible but adds bring-up work. eMMC moves that into the package, shortening development time and easing second sourcing on long-life platforms.
Product Line
Six suppliers covering mainstream consumer densities, industrial programs, and cost-sensitive builds. Click a brand to view its full eMMC listing.
The reference name in eMMC. Mature firmware, stable long-term supply, and broad capacity coverage make Samsung the default choice for smartphones, tablets, and high-volume consumer designs.
View Samsung eMMC →eMMC built on in-house NAND, with a strong record in industrial, networking, and embedded platforms that value long-term consistency.
View KIOXIA eMMCChinese storage specialist with cost-effective eMMC for consumer electronics and IoT, plus short lead times and flexible volume support.
View Longsys eMMCeMMC and managed NAND products from a supplier with its own controller know-how, aimed at consumer and embedded designs with tight cost targets.
View YEESTOR eMMCManaged NAND with a long industrial track record, suited to embedded platforms that need documented lifecycle support and wide temperature options.
View Micron eMMCeMMC families listed in our product center for mainstream capacity points. Ask us for available densities, packages, and firmware options.
View Rayson eMMCNeed a specific density, BGA footprint, or temperature grade not shown here? We source additional eMMC families on request.
Ask our teamTypical Applications
Operating system images, applications, and user data in the thinnest possible footprint on the main board.
Firmware, configuration, and local cache in connected gateways and smart home products where board space is tight.
Infotainment, cluster, and body control modules that need a soldered, vibration-tolerant storage device.
System images, app storage, and over-the-air update staging in smart TVs, boxes, and streaming platforms.
HMI panels, gateways, and controllers that store recipes, logs, and firmware in a fixed, serviceable position.
Music players, handheld terminals, and wearables where low power and a small package matter more than peak speed.
eMMC FAQ
eMMC stores the operating system, applications, and user data in consumer electronics and IoT devices. It is the standard choice when a design needs gigabytes of managed flash, a small package, and low power rather than the lowest cost per gigabyte.
Raw NAND gives the processor direct access to the die, so the host must run error correction, bad block management, and wear levelling. eMMC contains a controller that does all of this internally and exposes a standard MMC block interface, which simplifies firmware and speeds up development.
No. eMMC is a BGA device soldered onto the main board and is not user-removable. That is the key difference from an SD card, and the reason eMMC suits sealed products where the storage must survive shock and vibration.
Mainstream eMMC capacity sits between 32GB and 512GB, with smaller and larger options available on request. On the interface side, eMMC 5.1 covers most designs and 5.2 adds the higher-speed modes, both over an 8-bit or 16-bit data bus. Tell us your image size, write pattern, and expected product life and we will shortlist the parts.
Click the brand you need above to browse models, or contact us with your required capacity, interface generation, package, and temperature grade. We provide datasheets, samples, and fast quotes.
Related Products
Building a complete memory subsystem? These categories pair naturally with eMMC.
Raw and SPI NAND for designs that manage flash in the host instead of inside a package.
View NAND Flash →Fast random reads for boot code and firmware, often used alongside eMMC in the same system.
View NOR Flash →SRAM and pseudo-SRAM for code shadowing and high-speed data buffering next to the storage device.
View RAM Memory →Byte-writable non-volatile storage for calibration data, counters, and small parameter sets.
View EEPROM →Fast write, near-unlimited endurance, and zero-power retention for critical data.
View FRAM →Browse all memory, oscillator, MCU, analog, and sensor lines in one place.
View Product Center →Request a Quote
Tell us the capacity, interface generation, package, and quantity you need. Our team replies with pricing, stock, and datasheets within one business day.
Contact Us for eMMC Pricing →