Why FRAM
Ferroelectric RAM stores each bit in a thin ferroelectric layer instead of a charge pump. Writes happen at SRAM-like speed, take almost no power, and data survives power loss — with no erase-before-write.
FRAM writes hundreds of times faster than EEPROM at a fraction of the write energy, and endures billions of writes instead of about a million. For logging-heavy designs, FRAM removes the bottleneck.
Both are non-volatile RAMs with near-unlimited endurance. MRAM (Everspin, Hikstor) stores bits magnetically and offers symmetric read/write; FRAM leads on write power and cost at low densities. Tell us the slot and we will pick one.
Product Line
Four suppliers covering ferroelectric RAM and serial MRAM, 16Kbit to 8Mbit, industrial and automotive grades. Click a brand to view its full listing.
Pioneer in ferroelectric memory. The MB85 series covers serial FRAM from 16Kbit up to 8Mbit in SOP-8, SON-8, DFN-8, and WL-CSP packages, with industrial and automotive grades across 1.7V to 5.5V.
View FUJITSU FRAM →Serial MRAM from 128Kb to 4Mb in 8-DFN at 3.3V, with Industrial, Extended, and AEC-Q100 Grade 1/3 temperature options for automotive and industrial designs.
View Everspin MRAMSerial MRAM from 1Mb to 4Mb in SOP8 (150/208mil) and DFN8 5×6mm, 2.7–3.6V, rated -40°C to +125°C — a drop-in fit for EEPROM and FRAM sockets.
View Hikstor MRAMFull MB85 FRAM lineup across I2C, SPI, parallel x8/x16, and Quad SPI — 16Kbit to 8Mbit, down to 1.7V, in SOP, TSOP, FBGA, and DFN packages with automotive options.
View RAMXEED FRAMTypical Applications
Tamper logs, consumption profiles, and calibration data written continuously on battery-backed budgets.
Fast write, near-unlimited endurance, and zero-power retention for critical data in PLCs and data loggers.
Event recorders and setting storage in AEC-Q100 qualified MRAM and automotive-grade FRAM, -40 to +125°C.
Patient and usage data retention with ultra-low write power in portable and wearable instruments.
Page counters and configuration storage that survive millions of update cycles without wear-out.
Transaction journals and keys written instantly at power-off with no backup capacitor needed.
FRAM FAQ
FRAM is used wherever data must be written frequently and survive power loss: metering logs, event recorders, configuration and calibration storage, POS journals, and industrial data logging. It replaces EEPROM and battery-backed SRAM in these slots.
FRAM writes much faster and with far less energy, needs no erase cycle, and tolerates billions of writes instead of roughly a million. EEPROM remains cheaper at the smallest densities, so for a few hundred byte updates EEPROM can still win — beyond that, FRAM is the better fit.
Our FRAM and MRAM parts are specified for more than 10 billion read/write cycles with 10-year-plus data retention after power-off. Because writes do not wear the cell the way flash does, logging once per second still runs for decades.
I2C suits small parameter storage on two wires, SPI is the mainstream choice up to 8Mbit with the widest second-source options, and parallel or Quad SPI serves code-shadowing and higher throughput needs. Voltage matters too: families range from 1.7V low-voltage parts to 5.5V tolerant I2C. Send us your MCU and write pattern and we will recommend a part.
Click the brand you need above to browse models, or contact us with your required density, interface, package, and temperature grade. We provide datasheets, samples, and fast quotes.
Related Products
Building a complete memory subsystem? These categories pair naturally with FRAM.
Byte-writable non-volatile storage for calibration data, counters, and small parameter sets.
View EEPROM →SRAM and pseudo-SRAM for code shadowing and high-speed data buffering.
View RAM Memory →Non-volatile memory for storing and executing code, from boot code to full firmware images.
View NOR Flash →The low cost-per-gigabyte partner for data logging and media storage.
View NAND Flash →Managed NAND with a standard controller interface for mainstream embedded storage.
View eMMC →Browse all memory, oscillator, MCU, analog, and sensor lines in one place.
View Product Center →Application Articles
Data storage in real designs, from our engineering blog.
How a smart water meter runs six years on one battery cell, with 0.5μA deep power-down, 20-year data retention, and OTP regions protecting calibration data.
Read article →Why offline voice modules pair fast SRAM with non-volatile storage, and how the APS12804O-SQRHX-SN keeps audio buffers flowing on tight power budgets.
Read article →Request a Quote
Tell us the density, interface, package, and quantity you need. Our team replies with pricing, stock, and datasheets within one business day.
Contact Us for FRAM Pricing →