Home > Product Center > Microcontroller

32-bit microcontrollers that run the control loop of your product. Automotive-grade, high-performance, motor-control, low-power, and wireless lines from four suppliers, with datasheets and fast quotes.

Four brands, from 16 MHz entry parts to dual-core 300 MHz automotive MCUs, flash from 8 KB to 4 MB.

Speed16 – 300 MHz
Flash8 KB – 4 MB
LinesAutomotive · Motor · Wireless
PackagesTSSOP16 – LQFP144
Brands4 suppliers

Why This MCU Line

⚡What Is an MCU

A microcontroller puts the processor, flash, SRAM, and peripherals — timers, ADC, communication interfaces — on a single chip. One part runs your application logic, drives motors, and talks to the rest of the board.

⇄How to Choose a Series

Match the series to the job: entry and effective lines for cost-driven control, 200 MHz+ general parts for rich peripherals, automotive grades for harsh environments, and motor or wireless SoCs where the peripherals are already integrated.

⚖MCU Plus Memory

When firmware outgrows internal flash, an MCU boots or stores code from external NOR Flash, logs data to NAND or FRAM, and buffers in SRAM. We supply both sides of that design — MCU and memory.

Product Line

Four suppliers covering automotive, high-performance, motor-control, low-power, and wireless designs. Click a brand to view its full MCU listing.

HIGH PERFORMANCE · AUTOMOTIVE
Artery

The AT32 family spans Automotive (AT32A403A/423), General (F402/F403A/F405/F407/F45x), Effective (F415/F421/F423/F425), low-power L021, and Motor (M412/M416) lines — from 16 KB to 4 MB flash, up to 288 MHz, in TSSOP20 to LQFP144.

View Artery MCUs →
Automotive · Dual-core
YunTu

YTM32 automotive MCU family — YTM32B1L at 48 MHz for entry control, YTM32B1M at 120 MHz, and the dual-core YTM32B1H at 300 MHz + 300 MHz with 2.25 MB flash.

View YunTu MCUs
Motor SoC · Cost-effective
Cmsemicon

CMS8M and CMS32M motor-control SoCs from 16 to 72 MHz with drive peripherals integrated on chip — fans, pumps, and small appliances in SSOP, QFN, and LQFP packages.

View Cmsemicon SoCs
Wireless SoC · Connectivity
Winner

W600 and W800 series on a 32-bit XT804 processor, with 1–2 MB flash in QFN packages at 3.3V — connectivity-focused SoCs and MCUs for smart devices.

View Winner SoCs
Can't find the exact part number? Send us your block diagram — we will cross-reference the right series across all four brands and reply with datasheets and pricing.

Typical Applications

⚙Motor Control and Drives

Motor SoCs and M-series MCUs run fans, pumps, and servo loops with drive peripherals on chip.

▣Automotive Electronics

Automotive-grade AT32A and YTM32 parts for body control, lighting, and in-cabin functions.

☁IoT and Smart Devices

Wireless SoCs and effective-line MCUs for sensors, gateways, and connected home products.

⚒Industrial Control

High-performance F4 series parts with wide packages for PLC I/O, meters, and factory equipment.

⇄Home Appliances

Motor SoCs integrate the drive and control of fans, pumps, and small appliances in one chip.

♪Consumer Electronics

Cost-effective 421/425-class parts in compact TSSOP and QFN for everyday consumer designs.

Microcontroller FAQ

Q1
What does an MCU do in a product?

An MCU is the brain of the board. It runs the application firmware, reads sensors, drives motors or displays, and communicates with other systems over interfaces such as UART, SPI, I2C, and CAN — all from a single chip that integrates processor, flash, and SRAM.

Q2
How do I choose between the four brands?

Start with the job, not the brand. Automotive projects map to Artery AT32A or YunTu YTM32. Motor-driven appliances map to Cmsemicon motor SoCs. Connected devices map to Winner wireless SoCs. General industrial and consumer designs map to the Artery AT32 general and effective lines. Send us your requirements and we will shortlist parts.

Q3
What is different about an automotive MCU series?

Automotive series such as AT32A403A, AT32A423, and YTM32B1 are developed and qualified for vehicle environments — wider temperature operation, stricter quality and traceability requirements, and long-term supply. Use them wherever the part sits in a car or in safety-relevant equipment.

Q4
When should I use a motor-control SoC instead of a general MCU?

If your product's core function is driving a motor — a fan, pump, or small appliance — a motor SoC such as the CMS8M or CMS32M series already integrates the drive-specific peripherals, which shortens the BOM and the firmware work. A general MCU fits better when motor control is one of many tasks, or when you need more compute headroom for graphics, connectivity, or protocol stacks.

Q5
How do I get a quote or a datasheet?

Click the brand you need above to browse models, or contact us with your required core, frequency, flash size, package, and temperature grade. We provide datasheets, samples, and fast quotes.

Related Products

Building a complete board? These categories pair naturally with our MCU lines.

Code & parameter storage
NOR Flash

Fast random-access storage for boot code and firmware next to the MCU.

View NOR Flash →
Parameter storage
EEPROM

Byte-writable non-volatile storage for calibration data, counters, and small parameter sets.

View EEPROM →
Working memory
RAM Memory

SRAM and pseudo-SRAM for code shadowing and high-speed data buffering.

View RAM Memory →
Non-volatile RAM
FRAM

Fast write, near-unlimited endurance, and zero-power retention for critical data.

View FRAM →
High-density storage
NAND Flash

The low cost-per-gigabyte partner for data logging and media storage beside the MCU.

View NAND Flash →
Full catalog
Product Center

Browse all memory, oscillator, MCU, analog, and sensor lines in one place.

View Product Center →

Application Articles

See how our parts perform around the MCU in real designs, from our engineering blog.

APPLICATION NOTE

How a 16-bit absolute magnetic encoder feeds the 4 kHz control loop of a robot joint MCU, with 1μs data update, -40~125℃ operation, and field-strength alarms as a backstop.

Read article →
APPLICATION NOTE

Why a VFD control board executes code from external NOR flash beside the MCU, and how the PY25Q128LA-WXH-IR fits with 133MHz Quad SPI read, 0.5ms page write, and 16MB of code space.

Read article →

Request a Quote

Tell us the core, frequency, flash size, package, and quantity you need. Our team replies with pricing, stock, and datasheets within one business day.

Contact Us for MCU Pricing →

Microcontroller

contact us

Telephone: +86-150-1290-5940

Mobile phone: +86-150-1290-5940

Mailbox: sales@manduic.com

Address: Room 1115, R&D Building, DAFU Technology, Fenghuang Sub‑district, Guangming District, Shenzhen City