The global intelligent manufacturing and industrial robot industries maintain rapid growth. The robot sensor market reached USD 2.98 billion in 2025 and is projected to hit USD 6.22 billion by 2032, with a compound annual growth rate (CAGR) of 11.08%. With equipment upgrading toward higher precision and speed, high‑precision angle sensing has become an essential requirement for robot joints, servo control and precision production line positioning. Currently, sensors account for up to 63.7% of total equipment cost, acting as a major bottleneck for equipment upgrading. Meanwhile, traditional sensing solutions suffer significant drawbacks and fail to meet high‑end industrial demands. Conventional 12/14‑bit sensors lack sufficient precision for sub‑degree precise control; contact‑type structures are prone to wear, resulting in long‑term accuracy drift, high failure rates and costly maintenance and downtime. They also feature millisecond‑level response latency unsuitable for high‑speed closed‑loop control, along with poor environmental tolerance, causing unstable performance under dust, oil contamination and extreme temperatures and failing to support all‑weather operation. The industry urgently needs a new generation of high‑performance and high‑reliability angle sensing solutions.
Manduic is an authorized distributor of Conntek, providing KTH7812 supply and technical support.As a high‑performance 16‑bit absolute angle sensor, KTH7812 features the following core specifications:
Basic Performance: 16‑bit absolute angle output, INL ±0.35°, output noise (1σ) 0.015°, latency/update cycle 1 μs, maximum rotational speed 120,000 rpm
Electrical Characteristics: Dual supply voltage 3.0~3.6 V / 4.5~5.5 V, operating current 11.6 mA @ 3.3 V / 13.6 mA @ 5 V, start‑up time 1 ms, ESD (HBM) ±5 kV
Magnetic Field & Environment: Operating magnetic field 30~150 mT, operating temperature ‑40℃~+125℃, temperature drift 0.002°/℃
Output Interfaces: SPI Mode3 (CPOL=1, CPHA=1), programmable ABZ output up to 4096 steps/rev, programmable UVW output up to 18 pole‑pairs
Storage & Configuration: Built‑in multi‑time programmable MTP memory, magnetic field alarm with high/low threshold detection and output
Packages: QFN‑16L (3 mm×3 mm), SOP‑8 (4.9 mm×6 mm)
The product addresses the above challenges through its core technical advantages.
Adopting 16‑bit absolute angle output technology, KTH7812 delivers a resolution of 0.0055°, INL of only ±0.35° and ultra‑low output noise (1σ) of 0.015°, providing high‑precision angle measurement for precision positioning and high‑accuracy control applications. Its precision is 16 times higher than traditional 12‑bit sensors, supporting system performance improvement.
With 1 μs ultra‑low latency and update cycle, KTH7812 enables near‑real‑time angle data output, ensuring control systems obtain up‑to‑date position information and improving dynamic response and control accuracy. It supports rotational speed measurement up to 120,000 rpm for high‑speed rotating equipment.
Based on magnetosensitive non‑contact angle measurement, KTH7812 avoids mechanical wear and greatly extends service life. The contact‑free design ensures stable operation under harsh conditions such as oil contamination and dust, reducing maintenance costs and downtime risks.
Supporting an industrial‑grade temperature range of ‑40℃~+125℃ with temperature drift of only 0.002°/℃, KTH7812 maintains high‑precision measurement under extreme temperatures for stable performance in both cold outdoor environments and high‑temperature industrial sites.
KTH7812 supports dual‑voltage operation of 3.0~3.6 V and 4.5~5.5 V to adapt to various system power supplies. Available in QFN‑16L (3 mm×3 mm) and SOP‑8 (4.9 mm×6 mm) packages, it enables flexible PCB layout and miniaturized design. 0.1 μF and 10 μF decoupling capacitors placed near device pins are recommended to stabilize power supply.
It supports SPI Mode3 (CPOL=1, CPHA=1) for easy integration with various MCUs. Programmable ABZ (4~4096 steps/rev) and UVW (1~8 pole‑pairs) outputs are compatible with traditional encoder interfaces, simplifying system upgrading.
Built‑in multi‑time programmable MTP memory enables non‑volatile storage of user parameters. Factory‑calibrated and user‑defined parameters are permanently retained without re‑configuration after power‑on, enhancing system usability and reliability.
ESD Protection: ±5 kV (HBM) ESD resistance improves reliability during production and operation.
Magnetic Field Performance: 30~150 mT operating magnetic field with high/low threshold detection and alarm output monitors magnetic field status in real time and alerts for abnormalities to improve system safety.
Temperature Stability: Advanced temperature compensation technology ensures stable measurement precision across wide temperatures. Each device is fully temperature‑calibrated at factory to guarantee accuracy under all temperature conditions.
Compared with traditional angle sensing solutions, KTH7812 creates core value in precision, speed, service life, stability and integration cost. Its superior measurement precision and dynamic response directly improve control accuracy and operational efficiency of automated equipment, supporting differentiated performance upgrading and market competitiveness. Non‑contact long‑life operation greatly reduces failure rates and maintenance costs, minimizing production line downtime losses. Highly integrated and compatible hardware and software shorten R&D cycles and hardware modification costs for new product development and legacy equipment renovation. Excellent industrial‑grade reliability and environmental adaptability expand application scenarios, providing cost‑effective and reliable core sensing support for intelligent manufacturing upgrading.The advancement of intelligent manufacturing relies on breakthroughs in underlying sensing technologies. As a new‑generation 16‑bit high‑precision magnetic absolute angle sensor, KTH7812 solves industrial pain points of traditional sensing technologies with all‑round performance upgrades, mature engineering implementation and superior industrial reliability. Going forward, as industrial automation develops toward higher precision, dynamics and reliability, KTH7812 will continuously empower industrial robots, servo control and intelligent automation equipment, driving intelligent transformation and technological upgrading of the industry.#KTH7812 #AngleSensor #MagneticEncoderChip #Encoder #PositionSensing #IndustrialAutomationFor more product information:
Hotline: +86 150‑1290‑5940
Email: sales@manduic.com
Website: www.manduic.com
Telephone: +86-150-1290-5940
Mobile phone: +86-150-1290-5940
Mailbox: sales@manduic.com
Address: Room 618, 6th Floor, Derun Building, No. 366 Chaofeng Road, Fenghuang Street, Guangming District, Shenzhen, China